Preparation

Ensure that the barbecue is cool before and during painting. Clean surface by removing all loose paint and rust, dirt, grease and salt. Remove grease. Rinse with clean water and allow time to dry.

Application

• Ideal application temperature is 8 to 25ºC. Store aerosol at room temperature for 2 hours prior to use.
• Mask off surrounding areas that you do not wish to paint. Shake can vigorously, in a vertical action, until the agitator ball is heard and then for a further 3 minutes.
• Spray a thin covering coat, from a distance of 15cm (6"). Then apply a further 2 coats after 30 minutes leaving 5 minutes between coats.
• Ensure adequate ventilation during application and drying.
• Between coats invert can and spray for 2 seconds to avoid blockages.

Cleaning & Storage

Protect aerosol from direct sunlight and do NOT expose to temperatures exceeding 50ºC (120ºF). Do not pierce or burn, even after use.

Tools Required

Wire brush or coarse sandpaper, goggles and protective gloves.