Preparation

• Clean surface by removing all loose paint and rust, dirt, grease and salt. Remove grease. Rinse with clean water and allow time to dry.

Note: Special precautions should be taken to avoid inhalation of dust during surface preparation of pre-1960's paint surfaces as they may contain harmful lead.

Application

• Shake container well and pour required amount into a plastic container.
• By brush: apply direct to rusty area, working well into heavily pitted areas, corners and edges. Avoid coating onto painted areas.
• Hammerite Kurust will turn blue/black when reacting with rust. If it does not change colour in 1 hour re-apply. Apply topcoat after 3 hours.
• Do not replace unused Kurust back into the original container.

Cleaning & Storage

Clean container with water. Hammerite Kurust should be stored in a dry, well-ventilated area. Protect from frost and direct sunlight.

Tools Required

Wire brush, paint brush, plastic container and rubber gloves.