Preparation

• Remove all loose rust, dirt, grease and salt with Hammerite Brush Cleaner & Thinners and rinse with clean water. Allow time to dry.
• For painted metal surfaces wash down thoroughly with diluted detergent, rinse with clean water and allow to dry.

Note: Special precautions should be taken to avoid inhalation of dust during surface preparation of pre-1960's paint surfaces over as they may contain harmful lead.

Application

• Ideal application temperature is 8 to 25ºC. Stir paint thoroughly before use.
• By brush: apply 2 coats, allowing 2 hours between coats. Ensure corners and edges are well covered. Apply topcoat after 6 hours.
• Please refer to back of pack for specific application instructions.

Cleaning & Storage

Remove as much paint as possible from equipment before cleaning. For best results use Hammerite Brush Cleaner & Thinners. Hammerite should be stored in a dry well ventilated area. Protect from frost and direct sunlight. DO NOT EMPTY PAINT INTO DRAINS OR WATERCOURSES.

Tools Required

Brush or roller and Hammerite Brush Cleaner & Thinners.