Preparation

• Remove all loose rust, dirt, grease and salt with Hammerite Brush Cleaner & Thinners and rinse with clean water. Allow time to dry.

Note: Special precautions should be taken to avoid inhalation of dust during surface preparation of pre-1960's paint surfaces as they may contain harmful lead.

Application

• Ideal application temperature is 8 to 25ºC. Store aerosol at room temperature for 2 hours prior to use.
• Shake can vigorously, in a vertical action, until the agitator ball is heard and then for a further 3 minutes.
• Spray a thin covering coat, from a distance of 15cm (6"). Allow to dry. Then apply a further 2 coats allowing 30 minutes after each coat.
• Topcoat can be applied after 4 hours. Ensure adequate ventilation during application and drying. Between coats invert can and spray for 2 seconds to avoid blockages.

Cleaning & Storage

Protect aerosol from direct sunlight and do NOT expose to temperatures exceeding 50ºC (120ºF). Do not pierce or burn, even after use.

Tools Required

Hammerite Brush Cleaner & Thinners.