Preparation

• Remove all loose rust, dirt, grease and salt with Hammerite Brush Cleaner & Thinners and rinse with clean water. Allow time to dry.
• Degrease surface if necessary.
• For maximum adhesion on clean steel abrade surface with a coarse sandpaper.

Application

• Ideal application temperature is 8 to 25ºC. Stir paint thoroughly before use.
• By brush: apply 1-2 coats allowing 6 hours between coats.
• Apply topcoat after 6 hours.
• Please refer to back of pack for specific application instructions.

Cleaning & Storage

Remove as much paint as possible from equipment before cleaning. For best results use Hammerite Brush Cleaner & Thinners. Hammerite Red Oxide Primer should be stored in a dry well ventilated area. Protect from frost, extremes of temperature and direct sunlight. DO NOT EMPTY PAINT INTO DRAINS OR WATERCOURSES.

Tools Required

A paint brush, coarse sandpaper and Hammerite Brush Cleaner & Thinners.