Preparation

Remove loose rust with a wire brush or coarse sandpaper.

Application

• Shake container well and pour required amount into a plastic container. Dilute 1 part Rust Remover Dip with 9 parts water and mix thoroughly. Place rusty item into container and leave overnight.
• Rinse thoroughly under running water and remove remaining rust with a wire brush. Allow time to dry.
• If rust is not completely removed repeat process for a further 24 hours. To avoid any further rusting coat surface with Hammerite paint.
• Do not return any surplus Hammerite Rust Remover Dip back into the original container after use.

Cleaning & Storage

Clean container with water. Hammerite Rust Remover Dip should be stored in a dry well ventilated area. Protect from frost and direct sunlight.

Tools Required

Wire brush and a plastic container.